Atoms TeamNovember 16, 2026
How to measure shoe size at home, and what to do when you land between sizes
Most sizing mistakes start with a guess. You wore a 9 in one pair, so you buy a 9 again, and this pair pinches at the toes or slips at the heel.
This guide shows you how to measure shoe size at home in about five minutes. You will also learn how to turn that number into a US size with the Atoms chart. Then we cover what to do when your foot falls between two sizes, the step most guides skip.
Quick Answer
To measure shoe size, stand on a sheet of paper with your heel against a wall, mark your longest toe, and measure heel to toe in inches or centimeters. Do it for both feet late in the day, then match the larger number to a size chart. If you land between two half sizes, a quarter size closes the gap.
Key Observations
- Measure standing, late in the day: feet can swell by up to 8% over a day, according to the American Academy of Orthopaedic Surgeons (AAOS).
- Size to the bigger foot: left and right feet often differ a little, and pairs are sold matched.
- Each half size adds about 0.2 inches: on the Atoms shoe size conversion chart, a men's 9 is 10.82 inches and a 9.5 is 11.02 inches.
- Length is only half the fit: check width too, and leave 3/8 to 1/2 inch of space at the toe once the shoe is on.
- Between sizes is common: the Atoms Model 000 comes in quarter sizes, so you can land on 9.25 instead of choosing between 9 and 9.5.
Here is the whole process at a glance:
| Step | What to do | Why it matters |
|---|---|---|
| Set up | Paper on a hard floor, flush against a wall | Carpet lets the paper shift and shortens the reading |
| Measure length | Heel on the wall, mark the longest toe, measure | Length sets your size number |
| Measure width | Measure across the widest part of the tracing | Width decides whether that size will feel tight |
| Match the chart | Use the larger foot and the brand's own chart | Charts differ between brands |
| Check the fit | Toe room, heel hold, no pressure on the sides | A tape measure cannot feel a pressure point |
Not sure which Atoms pair suits you? Take the Atoms fit quiz: five questions, one size and one pair.
How do you measure your shoe size at home?
Measuring shoe size at home takes a sheet of paper, a pencil, a ruler and a wall. You trace or mark your foot while standing, then measure from the back of your heel to the tip of your longest toe. The AAOS fit guidance says to stand while you measure, because your full body weight spreads the foot.
What do you need to measure your feet?
- A sheet of paper longer than your foot. Tape two together if needed.
- A pencil or thin pen that you can hold straight up and down.
- A ruler or tape measure with inches and centimeters.
- Tape to keep the paper from sliding.
- Your everyday socks, the pair you expect to wear with these sneakers.
- A hard floor and a wall. Wood, tile or concrete all work. Carpet does not.
What are the steps to measure your foot length?
- Tape the paper to the floor with one short edge pressed flush against the wall.
- Put on your usual socks and stand on the paper with your heel touching the wall.
- Stand evenly on both feet. A slight bend in the knees is fine. Do not sit.
- Mark the tip of your longest toe. Hold the pencil upright. For some people the second toe is longer than the big toe, so check both.
- Measure from the wall edge to the mark. Write the number down in inches and in centimeters.
- Repeat with the other foot and keep the larger number.
If someone can help, ask them to make the toe mark while you stand still. Leaning forward to mark your own toe shifts your weight and can move your heel off the wall.

When is the best time to measure your feet?
The best time to measure your feet is late afternoon or evening. Feet swell through the day, and the AAOS puts that swelling at up to 8%.
A small lab study of eight young women sitting upright, published on CiNii Research, measured foot volume rising from about 562 ml to 579 ml over an eight hour period. A morning measurement can read small. The Atoms size chart pages give the same advice: measure at the end of the day.
How do you turn your foot length into a US shoe size?
To turn foot length into a US shoe size, find the closest length on the brand's own chart and read across to the size. The Atoms international size chart lists inches and centimeters for every men's and women's size, so you can match your number directly. If you are between two rows, keep reading. The next section covers that.
This table reproduces the Atoms chart values. Use it for Atoms shoes, and check other brands against their own charts.
| Foot length (inches) | Foot length (cm) | US men's | US women's |
|---|---|---|---|
| 8.66 | 22 | 3.5 | 5 |
| 8.85 | 22.5 | 4 | 5.5 |
| 9.05 | 23 | 4.5 | 6 |
| 9.25 | 23.5 | 5 | 6.5 |
| 9.44 | 24 | 5.5 | 7 |
| 9.64 | 24.5 | 6 | 7.5 |
| 9.84 | 25 | 6.5 | 8 |
| 10.03 | 25.5 | 7 | 8.5 |
| 10.23 | 26 | 7.5 | 9 |
| 10.43 | 26.5 | 8 | 9.5 |
| 10.62 | 27 | 8.5 | 10 |
| 10.82 | 27.5 | 9 | 10.5 |
| 11.02 | 28 | 9.5 | 11 |
| 11.22 | 28.5 | 10 | 11.5 |
| 11.41 | 29 | 10.5 | 12 |
| 11.61 | 29.5 | 11 | 12.5 |
| 11.81 | 30 | 11.5 | 13 |
| 12 | 30.5 | 12 | 13.5 |
| 12.2 | 31 | 12.5 | 14 |
| 12.4 | 31.5 | 13 | 14.5 |
| 12.59 | 32 | 13.5 | 15 |
| 12.79 | 32.5 | 14 | 15.5 |
| 12.99 | 33 | 14.5 | 16 |
| 13.18 | 33.5 | 15 | 16.5 |
Prefer one list? Use the men's shoe size chart or the women's shoe size chart. Converting a size from abroad? See the EU to US shoe size guide or the UK to US shoe size guide.
Is your shoe size the same as your foot length?
No, your shoe size is not the same as your foot length. A size is a label for a range of feet the shoe is built to fit. The inside of a shoe has to be longer than the foot, and Wikipedia's shoe size reference notes that the inner cavity is typically about 15 mm longer. That is why you match your foot length to a chart rather than to a ruler reading of the shoe.
The same reference explains where the steps come from. US and UK sizes are based on the barleycorn, an old unit of 1/3 inch, so each full size adds about 1/3 inch and each half size about 1/6 inch. The Atoms chart follows that pattern, with roughly 0.2 inches between half sizes.
How do men's and women's shoe sizes compare?
On the Atoms chart, a women's size equals the men's size plus 1.5. A men's 8 and a women's 9.5 both match the same 10.43 inch foot length. If you are crossing over, the women's to men's shoe size guide explains when that 1.5 rule holds and when it does not.
How do you measure foot width, and what do the letters mean?
To measure foot width, use the same tracing and measure straight across the widest part of the foot, usually the ball just behind the toes. Width tells you whether a size will feel right once you walk. Getting it wrong is common. A 2018 review by Buldt and Menz (open access on Springer Nature) found 63% to 72% of participants wore shoes that did not match their foot width or length.
- Find the widest point on each tracing. It sits across the ball of the foot for most people.
- Draw a straight line across it, edge to edge.
- Measure the line and note the larger of your two feet.
- Compare with how shoes feel: pressure on the outside edge or an upper that bulges over the sole means you need more width.
Widths are shown by letters. The AAOS describes them as running from A through E, or simply "wide". In US sizing, B is the standard width for women and D is the standard width for men. Our guide on what B width means in shoes covers the full letter range.
| Letter | Women's shoes | Men's shoes |
|---|---|---|
| B | Standard width | Narrow |
| D | Wide | Standard width |
| 2E (double E) | Extra wide | Wide |
Atoms shoes come in one standard width. The Atoms size chart pages say that if you generally wear wide shoes, you should go up half a size. For more on fit options, read the best minimalist sneakers for wide feet.
What should you do if you measure between two sizes?
If you measure between two sizes, take a quarter size when the shoe offers one. If it does not, size up when your toes need room and the heel still feels secure. On the Atoms chart, half sizes sit about 0.2 inches apart, so a quarter size splits that gap into steps of roughly 0.1 inch.
What is a quarter shoe size?
A quarter shoe size sits halfway between two half sizes, such as 9.25 between 9 and 9.5. The Atoms Model 000 size guide lists sizes in quarter steps from US men's 3.5 to 15 and US women's 5 to 16.5. The Atoms Model 001 comes in standard half sizes. Both size guides say the shoes are regular fit and true to size.

Should you size up or down in sneakers?
In sneakers, sizing up is usually safer than sizing down, because toes need space and feet swell during the day. The Shoe Service Institute of America advises fitting at the end of the day and leaving 3/8 to 1/2 inch of space for the longest toe. Use this table to decide:
| Your situation | What to choose | Why |
|---|---|---|
| Measurement sits between 9 and 9.5 on the chart | Model 000 in 9.25 | Matches the gap instead of jumping a half size |
| Same, but you want Model 001 | Size up to 9.5 | Model 001 comes in half sizes, and toe room matters more than a snug toe |
| Feet are wide or you wear thick socks | Go up half a size | The Atoms chart pages advise this for wide feet |
| One foot is clearly longer | Size to the longer foot | A short shoe hurts. A slightly roomy one can be laced tighter |
| Heel lifts out when you walk | Try the next quarter or half size down | Heel slip usually means too much length |
Feet that differ by more than a little need their own plan. Our guide to buying shoes when one foot is bigger than the other walks through the options.
What are the most common measuring mistakes?
The most common measuring mistakes shorten your reading and push you into a size that is too small. Most of them come down to posture, surface and pencil angle. With 63% to 72% of people in fit studies wearing poorly fitted shoes, according to the 2018 review by Buldt and Menz, these small errors add up.
- Measuring while sitting. Your foot spreads under body weight, so a seated reading comes out short.
- Measuring on carpet. The heel sinks and the paper creeps.
- Tilting the pencil. An angled pencil traces inside your foot and trims the outline.
- Marking the big toe by default. Measure to whichever toe reaches furthest.
- Measuring only one foot. Always measure both and use the larger one.
- Measuring first thing in the morning. Feet are at their smallest, so the number reads low.
- Trusting the label in old shoes. The size printed in a pair you own tells you about that shoe, not about your foot today.
How do you check the fit when your sneakers arrive?
When your sneakers arrive, check them at home on a clean floor, late in the day, in the socks you will wear. The AAOS recommends leaving about 1/2 inch from the tip of your longest toe to the end of the shoe. Your heel should stay in place with little slippage.
- Toe room: stand up and press the front of the shoe. You should feel about a fingertip of space past your longest toe.
- Width: the ball of your foot should sit in the widest part of the shoe without pressure on either side.
- Heel: walk a few steps. A small lift is normal. A heel that pops out is not.
- Instep: lace the shoe normally. It should feel snug across the top, not tight.
- Ten-minute walk: stay indoors and watch for hot spots or rubbing.

If the size is wrong, the Atoms product page says you can exchange it with no printer or box needed, and returns are accepted within 30 days of delivery. Some limited edition colors are made to order and final sale, so check the product page first. For a deeper fit checklist, read how sneakers should fit.
How often should you re-measure your feet?
Adults should re-measure their feet about once a year. The American Academy of Orthopaedic Surgeons notes that feet can grow as we age and suggests a yearly measurement. Re-measure sooner if your usual size starts to pinch, slip or rub.
Children need checks far more often, because their feet change quickly. Measure them the same way, standing with weight on both feet, and mark the longest toe for them. Then compare with the Atoms kids shoe size chart. For little ones, our toddler shoes fit guide covers when to size up.
| Who | How often | Source |
|---|---|---|
| Adults | About once a year, or when fit changes | AAOS |
| Anyone between brands | Before buying a new brand or model | Each brand uses its own chart |
| Children | Every few months | Feet grow quickly in childhood |
Frequently asked questions
Which foot should I use to pick my shoe size?
Use the larger foot. Your two feet are rarely identical, and shoes come in matching pairs. Sizing to the smaller foot leaves the bigger one cramped.
Should I measure my feet in socks or barefoot?
Measure in the socks you will actually wear with that pair. A thick sock and a thin no-show sock take up different amounts of room, so the right sock gives you a number that matches real life.
Can I measure my foot without a ruler?
Yes. Trace your foot, then measure the tracing with a tape measure from a sewing kit. A printed ruler also works if you first check it against a real one. Do not guess from a sheet of paper's size alone.
How much bigger are men's sizes than women's sizes?
On the Atoms size chart, a women's size is the men's size plus 1.5. A men's 8 is a women's 9.5, and both match the same 10.43 inch foot length on the chart.
Do Atoms shoes run true to size?
Yes. The Atoms size guide on each product page says the shoes are regular fit and true to size. Measure your foot, match it to the Atoms chart, and use quarter sizes on Model 000 if you land between half sizes.
How often should adults measure their feet?
The American Academy of Orthopaedic Surgeons suggests having your feet measured every year, because feet can grow as you age. Re-measure any time your usual size starts to feel tight or loose.
How do I measure a child's feet for shoes?
Use the same trace and measure method while the child stands with weight on both feet, and mark the longest toe yourself. Children's feet change quickly, so check the fit every few months and compare with the Atoms kids size chart.
Is it better to size up or size down if I am between sizes?
For sneakers, size up when your toes need room and the heel still feels secure. If a quarter size is available, take the quarter size closest to your measurement instead of jumping a full half size.
What does the D or B on a shoe size mean?
The letter is the width. Shoe widths run from A to E, and in the US a B is the standard width for women's shoes while a D is the standard width for men's shoes.
Can I exchange Atoms shoes if the size is wrong?
The Atoms product page says wrong sizes can be exchanged, with no printer or box needed, and returns are accepted within 30 days of delivery. Some limited edition colors are final sale, so check the product page before you order.
Ready to find your Atoms size?
You now have the three numbers that matter: length, width and the size that sits closest on the chart. If you landed between sizes, start with Atoms Model 000 in quarter sizes. If you would rather be guided, take the five-question Atoms fit quiz and get a size and a pair matched to how you live.